Dixon Grobet metalsmith silversmith #12 T Stake anvil SOLD

The Dixon #12 is the most versatile stake because it is a mini anvil with two tapering horns – the center portion is flat, one horn with a flat top and one horn nearly round tapering from about 1″ down to 3/8″ which works great for rings, earrings and bracelets. The #12 is barn fresh. It is used and shows signs of use. I have not cleaned nor have I dressed it since unpacking and it is not finished to a polish. This unpolished style is preferred by some smiths as the stake surface does not allow the work piece to move when struck while rough forming. You are free to clean, dress and polish for your style. This is sold “as is”. The #12 can be installed in a nice tree stump if you do not have a large vise or anvil or it can be fitted in the #88 stakeholder I have for sale on another post.

Compare price other info at Rio here.

USPS Priority shipping insured with delivery confirmation in continental US is included in the price.

Dixon #12 T Stake anvil $149 SOLD

Advertisements

Dixon Grobet Large Stake Holder #88 for sale

This cast iron holder provides the base for T stakes and other tools which fit in a 7/8″ x 7/8″ square anvil hardy hole. The base is 6″x4″ with four holes for 1/4″ bolts or lags and is 4 1/2″ tall. I had this on the edge of a large oak stump. (Retail $125)

The item for sale is the stake holder base only.      The item for sale is the stake holder base only.      There it is twice and the second time I typed  s  l  o  w  l  y. You only get #88 for $99. Not all the other stuff. Clear? Good. 🙂

USPS Priority shipping insured with delivery confirmation in continental US is included in the price.

Dixon #88 stake holder base $99 SOLD

Dixon Grobet metalsmith silversmith T stake cowtongue for sale (#8#9 sold)

#’s 8 and 9 sold – less than half price!  Buy one or both. USPS Priority shipping insured with delivery confirmation in continental US is included in the price.

These are the so-called cowtongue T stakes. #8 is swept up at the tongue end and has a flat anvil surface with angled sides. The #9 has a curved top with radius sides and a small edge at the end – slight round inverted rocker (retail $314). The #8 is hard to find and is great because of the flat surface in addition to the tongue end – more shapes, angles and use with sheet. The #8 is barn fresh. I have not cleaned nor have I dressed it since unpacking and it is not finished to a polish. This unpolished style is preferred by some smiths as the stake surface does not allow the work piece to move when struck while rough forming. You are free to clean, dress and polish for your style. They are sold “as is”. Either of these can be installed in a nice tree stump if you do not have a large vise or anvil or they can be fitted in the #88 stakeholder I have for sale on another post.

Dixon Stake #08 $149 SOLD

Dixon Stake  #09 SOLD

Any questions, comments or offers please contact me.

Thanks, Marshall

Dixon Grobet metalsmith silversmith stakes 90 18 19 25 sold

#’s 18, 19, and 25  – incredible price!  All four items for less than retail on stake #25 Buy together or any combination. USPS Priority shipping insured with delivery confirmation in continental US is included in the price.

#18 $50 sold

#19 $65 sold

#25 $60 sold

# 90 $30 sold

I purchased these from US Army-Ft. Sill, OK when they closed the art center on base in the mid 90′s.  These are cleaned and polished ready to use or for you to dress/alter tools to your particular style and needs. Stake #25 shows firescale from casting – does not/has not affected any forming work. Images are of this set offered for sale and are not stock images.

Any questions, comments or offers please contact me.

Thanks, Marshall

MHD Sterling silver hammered cuff bracelet 3 designs handmade

MHD Cross peen pattern cuff $55
PayPal - The safer, easier way to pay online!

sterling silver cross peen pattern cuff bracelet marshall hansen design c

MHD Ball peen pattern type 1 cuff $55
PayPal - The safer, easier way to pay online!

sterling silver ball sm peen pattern cuff bracelet marshall hansen design c

MHD Ball peen pattern type 2 cuff $55
PayPal - The safer, easier way to pay online!

sterling silver ball lg peen pattern cuff bracelet marshall hansen design c

Marshall Hansen Design sterling silver patterned cuff bracelets are made in my studio, are about 6.1 inches long, 2 1/4 inches wide, 1 3/4 inches tall. The width of the silver is 1/2 inch.

USPS Priority shipping insured with delivery confirmation in continental US is included in the price.

 

Chasing repousse silversmith tools 20 pieces with oak base set 2 Barn Fresh undressed SOLD

For sale – Set of tools/punches used for repousee or chasing work on metal

This set is comparable to other 20 piece sets offered by many jewelry supply outlets (RG $160, C $159, OF $187.95, etc). I purchased this marked set from US Army-Ft. Sill, OK when they closed the art center on base in the mid 90’s.  This set was pulled from my warehouse after being stored for more than 10 years and is in “Barn Fresh” condition. The set is NOT cleaned and polished and has a haze of surface oxidation. I would bet you a dollar these have never been hit with a hammer. The ends have the band saw kerf marks from the time they were cut from stock. See for yourself (typical image above).

A perfect opportunity to dress/alter tools to your particular style and needs and save money. Images are of this set offered for sale and are not stock images. Included is an oak base.

$75 for one 20 piece set chasing tools with oak base.

USPS Priority shipping insured with delivery confirmation in continental US is included in the price.

SOLD 5-23-2012

Buffing polishing station jewelry studio shop…

With the new year comes an editorial schedule

I’ll be happily sharing many of the operations and processes which make my studio work for me.

topics in this post

metro shelves with casters

shoe box storage/buffing station organization

label maker

dust control shop modification to buffing machine

buff recycling

buff maintenance – rake and wheel dresser (added 20120211)

Safety

wire shelves with casters

I like wheels so most of my storage and some workstations, like the buffer, are on casters. I can move things around in a small space. Watch for sales on the wire shelving/Metro Shelves. The 18 inch deep works best for visibility, shoe boxes and most of the totes or boxes I use. Always buy the largest set of shelving and use half, like the buffing station, and the other half for another desk-high shelf  (I know they come with a limited number of shelves. After a few years of buying when they go on sale you end up with a supply of parts to configure the way you want. Start with one and go)

jewelry buffing station 1 wire shelving casters shoe boxes

shoe box storage/buffing station organization

There are many small parts and tools in the studio and after a while you may get as tired as I did of digging through a large box. My decision to use clear shoe boxes started with the purchase of a bulk pack of 6 for $5. After stowing a few things I went back for more. You can find these at any home/DIY/big box. When they drop below a buck apiece w/lids (don’t forget to get lids they’re included) I buy more. Keep all compounds and buffs separated in closed/lidded boxes. Contamination of buffs with dirt or other compounds ruins them and they can waste hours of prep and final polish on your work.

jewelry buffing station 2 shoe box storage buffs

jewelry buffing station 6 shoe box label storage buffs

jewelry buffing station 5 shoe box storage buffs rouge

jewelry buffing station 4 shoe box storage buffs tripoli

jewelry buffing station 3 rouge thrum string leather

label maker

A friend bought me a label maker years ago – one of the most practical additions to the studio or workshop. If you know what is in a box you know two things: what is in there; and what doesn’t go in there. They are about $20-30. At least use peel back labels and a Sharpie if you don’t want to spend $30. Organize.

dust control shop modification to buffing machine

In earlier posts I talked about using the buffer and using a buffing machine creates dust. Period. See this post for ideas on an area dust collector for $20 for your studio. Crafters know the glue gun is an indispensable tool in the studio arsenal. The problem was my buffer was still sending dust out of the filter exhaust ports into the studio. When you figure hours of buffing that is a lot of dust and extra time cleaning. Part of the mental gymnastics one goes through to solve this type of problem is just looking around at what you have and saying “What if I do this with that?” I saw the rag bag and a glue gun in a newly opened un-sorted box. I cut sleeves from an old chambray shirt and plugged in the glue gun. I was done in less than an hour and this made a great difference in airborne cotton fibers. Glue the cuffs shut, glued top corners on the sleeves so they would drop vertically then glued each to the buffer case. This was done so I could use the buffer in nearly the same footprint as the shelving, near a wall for instance, and the sleeve bags wouldn’t stick out like an airport windsock. Images shown with buffer on.

jewelry buffing station 8 exhaust bag from sleeves

jewelry buffing station 7 exhaust bag from sleeves

jewelry buffing station 9 exhaust bag from sleeves

buff recycling

You may notice in the tripoli box some ring buffs look like they were used with rouge. I bought new ring buffs for rouge as the old ones were getting thin and the old ones went in the tripoli box. You can recycle buffs towards larger grits (tripoli is more aggressive than rouge) but not the other way. Tripoli on a rouge stage buff ruins the final polish. All of my steel buffs used to be some other application for non-ferrous surface finish. For final on steel I usually use Fabulustre.

jewelry buffing station 4 shoe box storage buffs tripoli

Buff maintenance

Here are two tools I use with the buffing station. The star wheel dresser is used to remove grooves or a radius from a hard felt wheel. The stars or spurs spin freely on an axle and bite enough to wear down the high spots until the face is true or one plane – it is moved side to side slowly and you will develop a touch after using it. The second tool, the rake,  is used with cotton or muslin buffs after they accumulate too much compound. You will notice the polishing action decreasing. A couple of smooth passes through the face of the buff knocks the matted compound/fibers loose and the buff works efficiently again. I made the rake using a piece of oak flooring scrap. A solid thick piece of wood about 6 x 2 x 1″ with good grain and no cracks will work. Drill small pilot holes for nails (these are 16d) on the end, drive the nails in,  use a cutting disc to cut off nail heads, use small rough carbide wheel or hand file to re-shape nails to a point and you are done. Another quick way to flat dress a hard felt wheel is with the edge of an old flat file or piece of steel strap.

star wheel dresser and buff rake jewelry polishing

star wheel dresser and rake for polishing station

star wheel dresser close up jewelry polishing

star wheel dresser close up

wheel buff rake close up oak and nails jewelry polishing

wheel buff rake close up oak and nails

Safety

While buffing: always wear eye protection/ face shield; Never wear gloves – use clamps and holding devices cautiously, I sometimes use finger tape from Gesswein; unless I’m working on one piece I’ll save up a large batch of pieces to polish so I can quickly switch to another piece before it gets too hot that way I don’t burn and let go; wear ear plugs; I don’t wear long sleeves; and no hair hanging – you can literally get scalped or die. (A Yale student died when her hair was caught in a spinning lathe. Many accidents are foreseeable or have happened to someone else. Tragic events happen quickly. Don’t take chances). Maintain buffs with rakes, dressers and wheels, use light pressure and re-charge, don’t press harder.

Take a break.

Work Safely.

Marshall